Applying The Coating

Lighting Plan

Shake the jerrycan with the coating well before pouring it into the reservoir of the nebulizer. (Turn the jerrycan upside down)  This way the coating gets completely mixed with the liquid.

This hand-held device is used for treating all surfaces inside and outside. The mist is given an electrostatic charge, which attracts it to the surface on which the nozzle is aimed. This makes this device highly recommended for treating indoor spaces such as halls in hospitals, offices or, for example, sanitary areas and kitchens.

Shake the jerrycan with the coating well before pouring it into the reservoir of the nebulizer. (Turn the jerrycan upside down!)  This way the liquid is completely mixed with the active ingredient.

Pour the desired amount of liquid into the reservoir of the nebulizer.  Stand at a distance of approximately 2.5 to 3 m. from the object to be treated and aim the nebulizer at the surface to be treated.  Work the surface from top to bottom in a zigzag motion.

For example, when you are working on a wall, it is important to estimate in advance how much liquid is needed for this.  To achieve the desired effect, always use the golden rule: You use 1 liter for 100 m2 of surface and you apply this in two treatments. (so twice 0.5 liters on 100 m2)

After the first treatment, allow the surface to dry for a few minutes before applying the second treatment.

Shake the appliance every 2 minutes to keep the coating and liquid well mixed.

Allow the coating to cure for 24 hours without touching the surface.

(After use, mist the nebulizer with clean water for 30 seconds.)

This fogging device is recommended for treating larger surfaces indoors and outdoors. Due to the high fogging power, the liquid is processed very quickly. As a result, the surface to be treated is also covered significantly faster than when using smaller, less powerful hand-held equipment.

Shake the jerry can with the coating well before pouring it into the reservoir of the fogging device. (Turn the jerry can upside down!) This way, the liquid is completely mixed with the active ingredient.

Pour the desired amount of liquid into the reservoir of the fogging device. Stand at a distance of 3 to 4 m from the object to be treated and point the fogging device at the surface to be treated. Work the surface from top to bottom in a zigzag motion.

For example, when you are working on a wall, it is important to estimate in advance how much liquid is needed for this. To achieve the desired effect, always use the golden rule: You use 1 liter for 100 m2 of surface and you apply this in two treatments. (so twice 0.5 liters on 100 m2)

After the first treatment, let the surface dry for a few minutes before applying the second treatment.

Make a few shaking movements with the device every 2 minutes to keep the coating and the liquid well mixed.

Let the coating harden for 24 hours without touching the surfa

(After use, mist the nebulizer with clean water for 30 seconds.)